PLC
CPU |
- Memory Size: 30K
- Fast (milli-seconds) Scan Time
- Four Communication Ports
- PLC Programming
- Windows Based
- Basic PLC, Math, Data Programming Instructions
- Analog Input & Output Modules (3 Cards Each)
- Total of 12 Channels
- Output Range +/-10V
- Resolution of 12 Bits
- Discrete Input & Output Modules (1 Card Each)
- Total of 32 Inputs
- External Terminal Strip & Cable
|
Programming
Touch Panel
|
- 10.4" TFT Color Panel
- VGA Resolution: 640x480
- 192 Touch Cells
- Communication to PLC
- Programming Screens
- Waveform of Current, Arc Voltage, Wirefeed, Travel,
Pulsation, & Gas Flow is Displayed
- Associated Program Variable Placed with Graph
- Keypad for Data Entry Displayed When Programmable
Value Box is Selected
- Diagnostic Screen with
Messages is Displayed
- I/O Status Screen
- Process Screen Displays
Programmed & Feedback Values
- Set Up Screen with Preset
Values & Overrides
- Panel Recipe for Storing Different Schedules
- Several Screens Can Be
Scrolled with Easy Access Back to Home Screen
|
Weld
Current
Pulsation |
- Pulsation Frequency : 0.1 Hz to 10 Hz, in increments of
0.1 Hz
- Current High Time: 0.01 Sec. to 10 Sec., in increments
of 0.1 Sec
- Weld Current High & Low
|
Arc
Voltage
Control |
- Arc Voltage Sampled Only During the High Current Pulse
- Control Will Lock Out the AVC Slide Motor During Low Current
Pulse
|
Wire
Feed |
- Wire Feed Reference Synchronized with Weld Current High
- Controllable Wire Feed Retract Time & Feed Rate
|
Scaling
PC Boards |
- Scaling of Four Channels Per Board
- Adjustments for Coarse Gain, Fine Gain, & Offset for
Each Channel
- High Stability Instrumentation Amplifiers
|
Manual
Parameter
Adjustment |
- Multi Turn Potentiometers Provided on the Operator Pendant
- Allowable Override Adjustments Set by a Keypad Function
- Override Values Can Be Reset on the Operator Pendant
|
Programmed
Shutdown |
- Slope Down Sequence of Weld Parameters in Event of Planned
or Unplanned Weld Stop
- Gas Stays on for Pre-programmed Post Flow Time in Case
of Emergency Stop
|
Auto
Home |
- Axes Homed Automatically at End of Weld if Desired
- Executed from Part Program
|
Hand
Held
Pendant
|
- Six Inch Touch Screen
- Screen Has Reference & Feedback Values Displayed
- Setup Parameters
- Overrides for Travel Speed, Weld Current, Arc Voltage,
& Wire Feed
- Discrete Operator Buttons
|
Wire Feeder
& Control |
- Wire Feed with Micro Stepping Motor
- Motor Controller
- Wire Feed Control Interface PC Board
- Roller Sets Included
|
| Gas Box |
- Four Flow Meters and Solenoids are Provided
- Interconnection to PLC Control
|
Torch
Oscillation |
- Oscillation in One Axis During a Weld Program
- Oscillation Distance, Feed Rate, & End Dwells are
Programmable
- Oscillator Slide Mounted to Existing Weld Torch Package
|
PLC Retrofits for Automated Welding Equipment: Feature
Sheet 
